PENGARUH JUMLAH KOMPOSIT BATUAN TERHADAP KESTABILAN LERENG TAMBANG TERBUKA BATUBARA MULTI LAPISAN MENGGUNAKAN METODE ELEMEN HINGGA 3 DIMENSI
Abstract
ABSTRAK
PT. X memiliki disain rencana tambang (pit plan) tahun 2020, yang memerlukan analisis kestabilan lereng guna mengoptimasi cadangan batubara tertambang dan keselamatan operasi penambangan. Pada penelitian ini, analisis kestabilan lereng menggunakan metode elemen hingga (MEH) 3 dimensi. Di samping itu juga dilakukan analisis probabilistik guna memvalidasi hasil perhitungan MEH 3 dimensi. Kompleksitas lapisan batuan yang cukup banyak pada tambang MIP memberikan kesulitan dalam memodelkan dalam analisis 3D menggunakan MEH. Oleh sebab itu digunakan pendekatan pembobotan parameter karakteristik batuan dalam menelaah keakurasian hasil perhitungan faktor keamanan (FK) dan penentuan lokasi lereng kritis. Secara praktis pendekatan pembobotan ini sudah diterapkan di sejumlah tambang batubara di Indonesia, namun terbatas pada analisis 2D. Oleh sebab itu hasil penelitian ini menjadi suatu pencapaian penting yang dapat disosialisasikan dan diaplikasikan oleh para praktisi geoteknik tambang di Indonesia
Keywords
Full Text:
PDFReferences
Ardhi, H.A.; Azizi, M.A.; Marwanza, I.; Hartami, P.N.; Nugroho, B.; Saptono, S. 2017. Perbandingan analisis stabilitas lereng metode kesetimbangan batas dengan metode elemen hingga menggunakan pendekatan probabilistik. Seminar Nasional Geomekanika 4 (SNG4) Padang: 179-185.
Azizi, M.A.; Kramadibrata, S.; Wattimena, R.K.; Sidi, I.D. 2013. Probabilistic analysis of physical models slope failure. International Symposium on Earth Science and Technology, CINEST 2012, Procedia Earth and Planetary Science 6: 411-418.
Azizi, M.A.; Kramadibrata, S.; Wattimena, R.K.; Sidi, I.D. 2014. Risk assessment of open pit slope design at PT Adaro Indonesia. Indonesian Mining Journal 17 (3): 113-121.
Azizi, M.A.; Marwanza, I.; Hartanti, N.A.; Anugrahadi, A. 2018. Three dimensional slope stability analysis of open pit limestone mine in Rembang District, Central Java. International Conference on Earth, Science, Mineral and Energy (ICEMINE) 2018, IOP Conf. Ser.: Earth Environ. Sci. (212) 012035, doi:10.1088/1755-1315/212/1/012035.
Azizi, M.A.; Marwanza, I.; Hartanti, N.A.; Aulianissa, A.; Anugrahadi, A 2019. The influence of number of grid points and radius increments in determining safety factor and estimated sliding volume on three dimensional slope stability analysis. The 2nd Mineral Processing and Technology International Conference, IOP Conf. Ser.: Mater. Sci. Eng. (478) 012041, doi:10.1088/1757-899X/478/1/012041.
Cheng, Y.M. and Yip, C.J. 2007. Three-Dimensional Asymmetrical Slope Stability Analysis Extension of Bishop’s, Janbu’s, and Morgenstern–Price’s Techniques, ASCE Journal of Geotechnical and Geoenvironmental Engineering, 133(12), 1544–1555. https://doi.org/10.1061/(ASCE)10900241(2007)133:12(1544).
Contreras, L.F.; LeSueur, R.; Maran, J. 2006. A case study of risk evaluation at cerrejon mine. International Symposium on Stability of Rock Slopes in Open Pit Mining and Civil Engineering, Cape Town, 3-6 April 2006. Johannesburg: The South African Institute of Mining and Metallurgy.
Department of Industry, Innovation and Science Australia. 2016. Risk management: leading practice sustainable development program for the mining industry. Australia: Commonwealth of Australia.
Hoek, E..1987. Faktor of Safety and Probability of Failure, Chapter 8 – Practical Rock Engineering.
Hoek, E..2000. Faktor of Safety and Probability of Failure, Chapter 8 – Practical Rock Engineering (revision).
Hoek, E..2006. Faktor of Safety and Probability of Failure, Chapter 8 – Practical Rock Engineering (revision).
Kepmen ESDM No 1827/K/30/MEM/2018 Tentang Pedoman Pelaksanaan Kaidah Teknik Pertambangan Yang Baik. 2018. Lampiran II Tentang Pedoman Pengelolaan Teknis Pertambangan.
Kramadibrata, S.; Wattimena, R.K.; Sidi, I.D.; Azizi, M.A. 2012. Open pit mine slope stability and uncertainty. ISRM Regional Symposium - 7th Asian Rock Mechanics Symposium, Seoul,15-19 October. Korea: International Society for Rock Mechanics and Rock Engineering.
Kramadibrata, S.; Wattimena, R.K.; Sidi, I.D.; Wicaksana, Y.; Azizi, M.a. 2013. Physical modeling and simulation of slope failure by means of centrifuge acceleration. ISRM International Symposium - EUROCK 2013, Wroclaw, 23-26 October. Poland: International Society for Rock Mechanics and Rock Engineering.
Masagus Ahmad Azizi & Rr Harminuke E. Handayani. 2011. Karakterisasi parameter masukan untuk analisis kestabilan lereng tunggal (studi kasus di PT. Tambang Batubara Bukit Asam Tbk. Tanjung Enim, Sumatera Selatan). Prosiding Seminar Nasional AVoER ke-3, 26-27 October 2011. Palembang: Fakultas Teknik Universitas Sriwijaya.
Read, J. & Stacey, P. 2009. Guidelines for open pit slope design. Collingwood: CSIRO publishing.
Rocscience, Inc. 2019. Slide 2 online help. https://www.rocscience.com/help/slide2. (Accessed on 8 March 2019)
Tapia, A.; Contreras, L.F.; Jefferies, M.; Steffen, O. 2007. Risk evaluation of slope failure at the chuquicamata mine. In Y Potvin (ed.), Proceedings of the 2007 International Symposium on Rock Slope Stability in Open Pit Mining and Civil Engineering, Australian Centre for Geomechanics, Perth: 477-495.
Terbrugge, P.J.; Wesseloo, J.; Venter, J.; Steffen, O.K.H. 2006. A risk consequence approach to open pit slope design. The Journal of The South African Institute of Mining and Metallurgy, Vol.106.
Wattimena, R.K.; Kramadibrata, S.; Sidi, I.D.; Azizi, M.A. 2012. Probabilistic analysis of single bench using new slope stability curves. ISRM Regional Symposium - 7th Asian Rock Mechanics Symposium, Seoul, 15-19 October. Korea: International Society for Rock Mechanics and Rock Engineering.
Wattimena, R.K.; Kramadibrata, S.; Sidi, I.D.; Azizi, M.A. 2013. Developing coal pillar stability chart using logistic regression. International Journal of Rock Mechanics & Mining Sciences 58 (2013): 55–60.
Article Metrics
Abstract view : 439 timesPDF - 360 times
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.